Leverage 20” Quick-Applied EPDM Flashing for More Productive Detailing

Whether it’s a roof coating, modified asphalt, or singly-ply membrane, installing a low slope roofing system will almost always require the flashing-in of objects penetrating through the roof system. Penetrations come in many shapes and forms, and progress on the job can be hindered greatly if there are a high volume of obstacles on the rooftop.

Think about a large warehouse consisting of 400 4’L x 4’W x12”H roof curbs. Each curb requires the roof mechanic on site to custom cut membrane flashing, apply splice tape to that membrane, adhere it to the curb, and splice the base flashing to the field membrane. On average, it takes a single mechanic .75 labor hours to complete this task, which translates to 300 labor hours dedicated to curb flashings on the project. That is not including the additional steps of corner detailing and lap sealant application.

Imagine if you could reduce the amount of time spent per curb from .75 labor hours to .23 labor hours (70% reduction), resulting in only 92 total man hours spent on 400 curbs! That is a tremendous amount of labor savings, and a nice boost to job profitability. But how is that achievable?

It can all be made possible with Versico’s labor-saving 20”x 50’ Quick-Applied Black or White Cured Flashing, which comes pre-cut with Quick-Applied Seam Tape across the entire width of the flashing. This allows contractors to flash curbs in record time. Versico’s Quick-Applied White Cured Flashing can also be used on TPO systems, which eliminates the need for generators and can save even more time on the roof.

For more information and footage of the product in action, please visit the links below.
Versico’s VersiGard White EPDM Quick-Applied Curb Flashing for TPO Systems Detail Video
Labor Savers: VersiGard 20” Wide Quick-Applied Cured Flashing